Philips PD9060, User Manual

Page: 15 / 25

16
The charge indicator turns on. When the player is not in use, it will
»
take about 8 hours to fully charge it. However, when in use, it will
take more than 16 hours to fully charge it.
When the battery is fully charged, the charge indicator turns off.
»
Install remote control battery
Caution
Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard
•
batteries in fi re.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
•
equivalent type.
Batteries contain chemical substances, they should be disposed of properly.
•
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/
•
hazardouswaste/perchlorate.
For fi rst-time use:
1
Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
3
Close the battery compartment.
EN
PD9060_05_UM_V1.0.indd Sec1:16 PD9060_05_UM_V1.0.indd Sec1:16 2010-2-1 13:39:39 2010-2-1 13:39:39