3 Get started
Charge your headset
Note
Before you use your headset for the first time,
charge the battery for one and a half hour for
optimum battery capacity and lifetime.
Use only the original USB charging cable to avoid
any damage.
Finish your call before charging the headset, as
connecting the headset for charging will power
the headset off.
Connect the supplied USB charging cable to:
• the micro USB charging slot on the
headset and;
• the charger/USB port of a computer
LED turns white during charging
and turns off when the headset is
fully charged.
Tip
Normally, a full charge takes 2 hours.
Pair the headset with your
mobile phone
Before you use the headset with your
mobile phone for the first time, pair it with a
mobile phone. A successful pairing estab-
lishes a unique encrypted link between the
headset and mobile phone. The headset
store the last 8 devices in the memory. If
you try to pair more than
8 devices, the earliest pained device is
replaced by the new one.
4
EN
Make sure that the headset are fully
charged.
Press and hold the button for 2
seconds to turn the headset on.
Activate the Bluetooth feature of your
mobile phone.
For previous device pairing, the
device will be paired with the
headphone automatically. A voice of
"Device connected" will be heard.
For new device pairing, select
Philips TAPH802 on your mobile
phone, the device will be paired
with the headphone. A voice of
"Device connected" will be heard.
For detailed information, refer to the
user manual of your mobile phone.
Philips
TAPH802
The following example shows you how to
pair the headset with your mobile phone.
Activate the Bluetooth feature of your
mobile phone, select Philips TAPH802.
Enter the headset password
"0000"
(4 zeros) if prompted. For those mobile
phones featuring Bluetooth 3.0 or
higher, no need to enter a password.
