ENGLISH
5
Close the shaving head holder. You will
hear a ‘click’.
Preparing SmartClean System For
Use
CAUTION: Keep cleaning cartridge(s) out of
reach of children. Do not take internally. Avoid
contact with eyes. In case of eye contact,
thoroughly flush with cold water. If irritation
persists, get medical attention.
Important
◗
For optimal cleaning results, replace the
cleaning cartridge every 3 months when used
weekly.
◗
Only use this shaver, SmartClean System and
cleaning cartridge provided to charge or clean
shaver.
◗
Other Philips Norelco shavers may not work
with this SmartClean System.
◗
To avoid evaporation, do not expose cleaning
solution to direct sunlight.
◗
The SmartClean System thoroughly cleans but
does not disinfect your shaver, therefore, do
not share shaver with others.
◗
The charging plug converts 100-240V AC to
less than 24V DC.
◗
Place the SmartClean System on a flat,
stable and fluid-resistant surface to avoid any
leakage. Be careful not to tip or move the
SmartClean System when it is ready for use.
25
ENGLISH
Cleaning the Shaving Unit
The shaving heads may be quickly cleaned after
each use by rinsing with hot water. Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
◗
Regular cleaning guarantees better shaving
results.
◗
While rinsing shaving heads, water may drip
out of the base of shaver. This is a normal
occurrence.
C
1
For best results rinse the shaving unit by
running under hot water for a few minutes.
C
2
Press the Shaver Head Release Button to
open the shaving unit.
C
3
Rinse the shaving head holder under hot
tap water for 30 seconds.
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
4
Carefully shake off excess water and let
the shaving head holder air dry completely.
24
