Philips Norelco QC5510, Instruction Manual

Page: 26 / 32

Cleaning the cutting element and comb
attachment
1 Switch off the appliance and disconnect it from
the mains.
2 Remove the comb attachment.
3 Rinse the comb attachment under the tap or
clean it with the cleaning brush supplied.
4 Apply pressure to the centre of the cutting
element to open it (1). Remove the cutting
element from the swivel head (2).
5 Rinse the cutting element under the tap or
clean it with the cleaning brush supplied. Then
let the cutting element dry.
Make sure the cutting element is entirely dry
before you reattach it to the appliance.
6 Clean the inside of the appliance with the
cleaning brush supplied.
7 Insert the lug of the cutting element into the
slot and push the cutting element back onto
the swivel head (‘click’).
1
2
1
2
25
QC5510_EN_CS3.indd 25 11.12.12 1:46:31 PM