Philips Norelco QC5510, Instruction Manual

Page: 24 / 32

Note: Do not turn the swivel head more than 90° to
the left or right.
- The swivel head allows you to hold and use the
appliance like a styling comb.
5 Push the on/off slide upwards to switch on the
appliance.
6 Move the clipper through the hair slowly.
7 Regularly remove cut hair from the comb
attachment.
If a lot of hair has accumulated in the comb
attachment, remove the comb attachment from
the appliance and blow and/or shake the hair out
of it. When you remove the comb attachment, the
selected setting does not change.
Tips
We advise you to start clipping at the highest -
setting of the comb attachment and to reduce
the setting gradually.
To clip most effectively, move the appliance against -
the hair growth direction.
- Since all hair does not grow in the same direction,
you need to move the appliance in different
directions (upwards, downwards and across).
Make sure that the flat part of the comb -
attachment is always fully in contact with the scalp
to obtain an even result
Write down the settings you use to create a -
certain hairstyle as a reminder for future clipping
sessions.
Contouring without comb attachment
You can use the appliance without comb attachment
to clip your hair very close to the skin (1mm) or to
contour the neckline and the area around the ears.
23
QC5510_EN_CS3.indd 23 11.12.12 1:46:29 PM