6
Turn appliance OFF.
7
Dry your face with a soft cloth.
8
Clean heads after each shave (see’Cleaning’) .
9
Put Protective cap on appliance.
BEard styling
- Only use the beard styler attachment to style
facial hair.
- Always comb beard and/or moustache with a fine
comb before trimming.
1
Pull the shaving attachment straight off the
appliance. Do not twist.
2
Attach beard styler to appliance.
Styling Tips
- To prevent trimming your beard and moustache
too short, make sure your facial hair is dry.
- Always trim in front of a good size mirror with
plenty of light. You can also try using a magnifying
mirror or a 3-way mirror.
- Start trimming near one ear and trim down to
your chin. Then repeat the same on your other
side. This will help maintain an even trimming
balance on your face.
English
14
Using Beard Styler with Comb
- Use the comb when trimming your beard.
- The length settings on the beard styler
attachment correspond to the remaining hair
length of your beard after cutting.
- Choose any setting between 3/64-11/64 in.
(1-4.5mm).
- If you are new to trimming, use the maximum
setting (11/64 in./4.5mm) to prevent accidentally
trimming hairs too short.
1
Press the length selector (1) and push left or
right (2) to select desired hair length setting.
2
Turn appliance ON.
3
Style your beard as desired always making sure
the front of the comb is in full contact with
the skin and move the appliance against the
direction of hair growth.
Note: If cut hairs accumulate in the comb, turn the
appliance off, remove comb and blow and/or shake
hair out of the comb.
Tip: Try different trimming positions (i.e.
upwards, downwards or across) since all hairs
do not grow in the same direction. Practice
for best results.
4
Turn appliance OFF.
5
Clean Beard Styler and comb after each use
(see ‘Cleaning’).
English
15
