Extra-thorough Cleaning Method
1
Press the shaving unit release buttons (1) and
pull shaving unit off the shaving attachment (2).
2
Unlock the retaining ring by turning it in the
direction of the arrows (1) on the retaining
ring and lift the retaining ring out of the shaving
head holder (2).
3
Remove the cutter and comb and separate the
cutter from the comb.
Tip: Do not clean more than one cutter and
comb at a time as they are matching sets. If
you accidentally put a cutter in the wrong
comb, it may take several weeks before
optimal shaving performance is restored.
4
Clean the inside and outside of both the cutter
and comb with the supplied brush.
5
Place the comb in the shaving head holder
making sure the two wings fit exactly in the
recesses of the shaving head holder.
English
20
6
Place the cutter into the shaving head holder
with the cutter legs pointing down.
7
Reattach the retaining ring (1) by turning it
the opposite direction of the arrows on the
retaining ring (2).
Make sure the four wings of the retaining ring
are located exactly under the recesses of the
shaving head holder.
8
Reattach the shaving unit to the shaving
attachment. If it does not close smoothly, check
that the shaving heads and retaining rings are
positioned properly.
Cleaning the Bodygroom Attachment
1
If a trimming comb is attached to the appliance,
remove it.
2
Pull the bodygroom foil off the attachment.
Do not apply pressure to foil. Do not touch foil
with hard objects as this may dent or damage foil or
cutters. If damage occurs, replace damaged parts.
3
Rinse the bodygroom attachment, foil and
combs under hot water.
English
21
1
2
1
2
