8
2. Setting up the monitor
Note
•
MPRT: To reduce motion blur, LED
backlight will strobe synchronously
with screen refresh, which may
cause noticeable brightness change.
•
75Hz refresh rate or higher is re-
quired for MPRT.
•
AMD FreeSync
™
Premium and MPRT
cannot be enabled simultaneously.
•
MPRT is to adjust brightness for blur
reduction, so cannot adjust bright-
ness while MPRT is turned on.
•
MPRT is gaming-optimized mode.
Turn on MPRT may cause noticeable
screen flickering. It is recommended
to turn off when you are not using
the gaming function.
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
2560 x 1440. When the monitor is
powered on at a different resolution, an
alert is displayed on screen: Use 2560 x
1440 for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Physical Function
Tilt
20°
-5°
Height adjustment
110mm
Warning
•
To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
•
Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
