19
ENGLISH
´
REFERENCE SETTING
Five different Brightness/Contrast parameters ‘pairs’ are available (Factory preset).They are identified with a number in the range 1-5. These val-
ues can be modified using OSD Service Local Menu item ‘STORE REF. SET’. The Reference Setting #n choice defines which pair of ‘Brightness’
and ‘Contrast’ parameter is to be used when ‘Reference Setting Recall’ or ‘Store Ref. Set.’ function is activated.
When the Special Function Menu window is displayed on the screen, if ‘REF. SETTING (1/2/3/4/5)’ item is highlighted:
Pressing the “SELECT” key, the Reference id. number displayed on the line ‘rotates’ starting from the current setting through all of the 5 possible
choices, at the same time the newly selected reference becomes the active one. If the ‘Daisy Chain Mode’ option is enabled, the proper daisy chain
command sequence is transmitted over the Daisy Chain Line and all other monitors execute the same function.
´
LOCAL MENU
When the Global Menu window is displayed on the screen, if ‘LOCAL MENU’ item is highlighted:
Pressing the “SELECT” key, the GLOBAL Menu window is replaced by the Local Menu window:
GLOBAL MENU
SEL EXIT - +
KEYBOARD LOCK
ABC FULL
REF. SETTING 5
GLOBAL MENU
SEL EXIT - +
ABC FULL
REF. SETTING 1
LOCAL MENU
LOCAL MENU
SEL EXIT - +
ABC MASTER ON
POWER SAV. ON
AUTO DEG.
OFF
DAISY ADDR. 6
DAISY-CH.
ON
ORBITING
OFF
LIGHT BAR
ON
OSD REVERSE
OSD POSITION
SHOW CONFIG.
STORE REF. SET.
H. SIZE
V. SIZE
H. SHIFT
V. SHIFT
TILT
ABC BRIGHTNESS
ABC CONTRAST
SERVICE MENU
Summary of Contents for MGD203
Page 30: ...APPENDIX ...
