Philips MCP9350i/31, Quick Install Manual, Page: 77 / 100

77
Connecting audio
Digital
OPTICAL IN
Receiver /
Recording device
COAXIAL IN
Receiver /
Recording device
Digital optical audio connection
•
Connect a digital optical cable (not supplied) between
the
OPTICAL IN socket of the monitor,TV, receiver
or recording device and the DIGITAL OPTICAL
output ( 9 ) of the Media Center.
Digital coaxial audio connection
•
Connect the digital coaxial cable between the
COAXIAL IN socket of the monitor,TV, receiver or
recording device and the DIGITAL COAXIAL output
( 19 ) of the Media Center.
Receiver /
Recording device
L
AUDIO IN
R
Analog audio connection
•
Connect the stereo audio cinch cable between the
AUDIO IN L/R sockets of the monitor,TV, receiver or
recording device and the AUDIO OUT L/R sockets
(20) of the Media Center.
Analog
IR
Set-top box
Connecting an IR-blaster
1 Remove the adhesive tape from the infrared sensor of
the IR blaster.
3 Place the IR blaster in front of the IR receiver eye of
the cable / satellite set-top box.
4 Connect the IR blaster cable to one of the IR
BLASTER outputs ( 14 ) of the Media Center.
> You can now select channels on your cable/satellite set-top
box, using the Media Center remote control.
IR-blaster
MCP9350i-31_EN.qxd 04-04-2006 09:11 Pagina 77