10
EN
1
Connect the power cord to the
AC~MAINS
jack on the main unit.
2
Connect the power plug to the wall
outlet.
Install remote control
batteries
Caution
Risk of explosion! Keep batteries away from heat,
•
sunshine or fi re. Never discard batteries in fi re.
Risk of decreased battery life! Never mix different
•
brands or types of batteries.
Risk of product damage! When the remote control is
•
not used for long periods, remove the batteries.
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
AC MAINS ~
3
1
2
Set clock
1
In standby mode, press and hold
CLOCK/DISPLAY
to activate the clock
setting mode.
[SET CLOCK] (set clock) is displayed
»
briefl y. Then the hour digits are
displayed and begin to blink.
Note
In Eco Power Standby mode, press
•
CLOCK
to show
clock fi rst, then press and hold
CLOCK
to proceed
clock setting.
2
Press
repeatedly to select 12 hour or
24 hour format.
3
Press
VOL +/-
to set the hour.
4
Press
CLOCK/DISPLAY
to confi rm.
The minute digits are displayed and
»
begin to blink.
5
Press
VOL +/-
to set the minute.
6
Press
CLOCK/DISPLAY
to confi rm.
Turn on
1
Press
POWER
on the main unit.
The unit switches to the last selected
»
source.
Switch to standby
1
Press
POWER
to switch the unit to
standby mode.
The backlight on the display panel
»
turns off.
The clock (if set) appears on the
»
display panel.
Note
If no button is pressed over 15 minutes in Standby
•
mode, the unit goes to Eco Power Standby mode
automatically and the backlight on the display turns off.
