Philips MCM309R, Owner'S Manual

Page: 12 / 35

12
English
Preparations
FM Antenna
1
2
●
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
C
Speakers Connection
Front Speakers
1
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "RIGHT" and left
speaker to "LEFT", colored (marked) wire to "+"
and black (unmarked) wire to "-".
●
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
4
2
2
Remove the detachable cover on the
CONNECT TO SUB WOOFER terminal on
the back of the main set.
3
Connect the CONNECT TO SUB
WOOFER terminal of the main set to the
CONNECT TO MAIN SET terminal of the
subwoofer with the supplied 15-pin D-Sub cable
by matching the pins. Fix the four screws on the
connectors to ensure firm connection.
4
Close the detachable cover until hearing a click.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Placing the set and speakers
With the supplied detachable stands and wall
mounting kit, you can either place the main set
and speakers on desktop or mount them onto
wall. Desktop installation is taken for example
here. For how to mount the system onto wall,
please refer to Appendix and the attached Wall
Mounting Instructions.
1
Align the side marked PRESS
4
of the larger-
size stand with the slots at the bottom of the
main set.
2
Push the stand down into the slots until you hear
a click.
3
Attach the two smaller-size stands to the
speakers in the same way.
4
Place the main set and speakers upright on the
desktop with the support of the stands.
Note:
– To remove the stand from the main set or either
speaker, while pressing down PRESS
4
, pull the
stand out from the slots.
pg001-033_MCM309R_37_Eng 2007.1.30, 9:58 12