background image

English

15

Radio Reception

Tuning to radio stations

1

Press 

SOURCE

 on the set repeatedly or press

TUN

 on the remote control repeatedly until

the desired waveband (FM or MW) is displayed.

2

Press down on 

TUNING 

4 ¢

 (

à

 / 

á

on the remote control) and release the button.

The radio automatically tunes to a station

with sufficient reception. Display indication during
automatic tuning: 

SEARCH

.

3

Repeat step 

2

 if necessary until you find the

desired station.

To tune to a weak station, press 

TUNING

 

4

¢

 (

à

 / 

á

on the remote control) briefly

and repeatedly until you have found optimal
reception.

Programming radio stations

You can store up to a total of 40 radio stations
in the memory.

Automatic programming

Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.

1

Press 

ALBUM/PRESET

 

+

+

+

+

+

/

-

-

-

-

-

 to select the

preset number where programming should start.

Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.

2

Press 

PROG.

 for more than 2 seconds to

activate programming.

AUTO

 is displayed and available stations are

programmed in order of waveband reception
strength. The first preset automatically stored will
then be played.

Manual programming

1

Tune to your desired station (see Tuning to radio
stations).

2

Press 

PROG.

 to activate programming.

PROG

 flashes in the display.

3

Press 

ALBUM/PRESET

 

+

+

+

+

+

/

-

-

-

-

-

 to allocate a

number from 1 to 40 to this station.

4

Press 

PROG

 again to confirm the setting.

PROG

 disappears, the preset number and the

frequency of the preset station are shown.

5

Repeat the above four steps to store other
stations.

You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

Press 

ALBUM/PRESET

 

+

+

+

+

+

/

-

-

-

-

-

 until the

desired preset station is displayed.

M I C RO   S Y S T E M   M C M 1 4 9

SOURCE

DBB

STANDBY-ON

VOL

VOL

TUNING

CD/CD-R/CD-RW COMPATIBLE

iR

ALBUM/PRESET

MODE

PROG

pg001-pg022_MCM149

2007.8.28, 11:20 AM

15

Summary of Contents for MCM149
























Reviews: