27
3
On the PC, launch the WADM on the PC
to update the firmware.
I have problems installing WADM or launching
WADM after installation, what do I do?
Ensure that the operating system of the PC
meets the requirements.
Ensure that the PC is virus-free.
Some files on the USB device are not
displayed, what do I do?
Check if the number of folders exceeds 99
or the number of titles exceeds 999.
Only completely recorded MP3/WMA files
can be found and played. Check if the file
has been recorded completely.
DRM-protected WMA files cannot be
played.
The remote control does not function
properly, what do I do?
Reduce the distance between the remote
control and the MCi300.
Insert the batteries with correct polarity
(+/- as indicated inside the battery
compartment).
Replace the batteries.
Point the remote control directly at the
infrared sensor.
The screen of the MCi300 is stuck in a menu
or shows no response for a long period of
time (2-5 minutes), what do I do?
Press
/ON/STANDBY/ECO-STANDBY
.
If the problem persists, restart the power
(disconnect and reconnect the power
plug) to reset the MCi300.
‘No Disc’ / ‘Cannot read CD’ is displayed,
what do I do?
Insert a suitable disc.
Check if the disc is inserted with the
graphics side (label) facing up.
Wait for the condensation moisture on the
lens to clear.
Replace or clean the disc.
Use a finalized CD-RW or CD-R.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Tr
oubleshooting
En
gl
is
h
EN
