65
English
Tuner
Tuning to radio stations
1
Press
STANDBY-ON
B
(or
B
on the
remote) to switch on the last selected source.
2
Press repeatedly
SOURCE
(or
TUNER
on
the remote) until
FM
or
MW
is displayed.
3
Press and hold
TUNING
3
/
4
or
TU +/-
à
/
á
on the remote until the frequency in the
display starts changing.
➜
Display shows
SEARC
during automatic
tuning.
➜
After the system tunes to a station of
sufficient reception, display shows its frequency .
●
To tune to a weak station, press briefly and
repeatedly
TUNING
3
/
4
or
TU +/-
à
/
á
on the remote until an optimal reception is
found.
4
Repeat Step 3 if necessary until you find the
desired radio station.
Storing preset radio stations
You can preset up to 40 stations (20 in each
band) regardless of the reception.
Manual programmng
1
Tune to your desired radio station (refer to
“Tuning to radio stations”).
2
Press
PROG
on the remote.
➜
”
PROG
” icon flashes.
3
Press
PRESET
3
/
4
or
CH +/-
(
¡
/
™
) on the
remote to select the desired preset number.
4
Press
PROG
on the remote again to store the
radio station.
➜
”
PROG
” disappears on the display.
●
Repeat steps 1-4 to store other radio stations.
Helpful hints:
– You can erase a preset station by storing
another frequency in its place.
Autostore: automatic programming
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be erased.
●
In tuner mode (FM or AM), press and hold
PROG
until
AUTO
appears.
➜
During automatic programming, display shows
AUTO
and flashing
PROG
.
➜
Available stations are programmed (20FM or
20 AM).
➜
After all stations are stored, the first autostore
preset station automatically plays.
Listening to preset radio stations
●
In tuner mode, press
PRESET
3
/
4
or
CH +/-
(
¡
/
™
) on the remote to select the desired
preset number.
➜
The preset number, radio frequency, and
waveband are displayed.
p038-p071_MCD300_Eng
2005.11.3, 16:34
65