English
13
Step 3: Antenna connection
Connect the supplied FM antenna to the
respective terminal. Adjust the position of the
antenna for optimal reception.
FM Antenna
●
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
Step 4: Connecting TV
IMPORTANT!
– You only need to make one video
connection from the following options,
depending on the capabilities of your TV
system.
– Connect the DVD system directly to
the TV.
Using Video In jack (CVBS)
1
Use the composite video cable (yellow) to
connect the system's
VIDEO
jack to the video
input jack (or labelled as A/V In, Video In,
Composite or Baseband) on the TV set.
2
To hear the sound of this DVD Player through
your TV, use the audio cables (white/red-not
supplied) to connect
LINE OUT (L/R)
jacks of
the DVD Player to the corresponding AUDIO
IN jacks on the TV.
Connections
Step 2: Connecting speakers
and subwoofer
1
Connect the supplied DB15 cable to DVD
player’s
DB15 CONNECTOR TO
SPEAKER
jack and the Subwoofer’s
DB15
CONNECTOR TO MAIN UNIT
jack.
●
Fix the two screws on each connector to ensure
firm connection.
2
Connect the speaker wires to the
SPEAKER
terminals on the subwoofer, right speaker to "R"
and left speaker to "L", coloured (marked) wire
to "+" and black (unmarked) wire to "-".
●
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
1.000
DB15 CONNECTOR
TO MAIN UNIT
SPEAKERS 4
1.000
pg001-pg039_MCD149-12-Eng
2007.9.13, 15:35
13
Summary of Contents for MCD149
Page 3: ...3 7 1 2 3 4 5 6 8 9 0 4 ...
