32
English
Radio Reception
Tuning to radio stations
1
Select
TUNER
source.
➜
“
FM
” or “
MW
” is displayed briefly.
2
Press
BAND
to select the desired waveband :
FM or MW.
3
Press and hold
TUNING
S
or
¢
(
ALBUM-/+
22
/
33
on the remote) and
then release it.
➜
The display will show "
SEARCH
" until a radio
station with sufficient signal strength is found.
4
Repeat step
3
if necessary until you find the
desired station.
●
To tune to a weak station, press
TUNING
S
or
¢
(
ALBUM-/+
22
/
33
on the
remote)
briefly and repeatedly until you have
found optimal reception.
Programming radio stations
You can store up to 40 radio stations in the
memory (20 for FM and 20 for MW).
Automatic programming
Press
PROGRAM
(
ANGLE/PROG
on the
remote) for more than three seconds to
activate programming.
➜
All available stations are programmed.
➜
AUTO
is displayed and available stations are
programmed in order of waveband.
Manual programming
1
Tune to your desired station (refer to “Tuning to
radio stations”).
2
Press
PROGRAM
(
ANGLE/PROG
on the
remote) to activate programming.
➜
PX
flashes on the display, in which X stands
for the programme number.
3
Press
ALBUM/PRESET
4
/
3
to allocate a
number from 1 to 20 for this station.
4
Press
PROGRAM
(
ANGLE/PROG
on the
remote) again to confirm the setting.
➜
The frequency of the preset station is shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Note:
– During setting, if no button is pressed within 30
seconds, the system will exit manual programming
automatically.
CLOCK SET
BAND
STANDBY-ON
ECO POWER
RECORD
DISPLAY
VOLUME
M C D 5 1 0 M I C R O
INCREDIBLE
SURROUND
PROGRAM
TUNING
ALBUM / PRESET
SOURCE
TIMER SET
DBB
DSC
iR
OPEN/
T H E A T H R E
pg001-pg040_MCD510_21-Eng
2005.10.28, 9:25
32
