14
English
Installation
Using AC power
1
Make sure all the connections have been made
before switching on the power supply.
2
Connect the AC power adaptor to the wall
socket. This switches on the power supply.
When MCB275 is switched to standby, it is still
consuming some power.
To disconnect the
system from the power supply completely,
remove the power plug from the wall
socket.
The type plate is located on the rear of the
set.
For users in the U.K.: please follow the
instructions on page 2.
Warning!
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it
(not available for all versions).
P001-P030_MCB275_05_Eng
2007.6.13, 10:28
14
