Philips Maestro DS9600, Service Manual

Page: 4 / 19

2-2
MECHANICAL INSTRUCTIONS
Set Disassembly
5a. Disconnect PB (item 1002) to release the flex-cable
(unlock connector 1003 with the help of a pincet).
5b. Take battery out, disconnect battery plug
(item 251) on connector 1701
4. Remove PB (item 1002) includes docking
insert (item 22) by release the two
“plastic snap hooks” as shown in the picture.
5c. Remove 2 X screws (Torx screw M2X8)
on the position as shown in the picture.
6. - Release bottompart (item 02) from toppart (item 01).
step 1: very important is to start up with one of the “sides”
as shown in the picture.
- Put a sharp knife between toppart and bottompart and use
this as a lever to separate the two parts.
- Important: push up the bottompart compared with the toppart
to unlock the plastic snaps in the holes (bottompart).