Philips M888 Extended User Documentation Download Page 28

Page: 28 / 52

12 Phone settings

You can customize the settings to make it your

own phone.

Set the date and time

For further information, see chapter 'Get

started', sections 'Set the date and time' and

'Set the date and time format'.

Auto answer

When you activate the auto answer feature, you

can connect to the incoming call automatically

once you pick up the handset. When you

deactivate this feature, you have to press or

to answer the incoming call.

Select

[Menu]

Press /

to select , then press

[OK]

to confirm.

Select

[Auto answer]

, then press

[OK]

confirm.

Select

[On]

[Off]

, and press

[OK]

confirm.

The setting is saved.

ECO mode

The

ECO

mode reduces the transmission

power of the handset and base station when

you are on a call or when the phone is in

standby mode.

Select

[Menu]

Press /

to select , then press

[OK]

to confirm.

Select

[Eco mode]

, then press

[OK]

confirm.

Select

[On]

[Off]

, and press

[OK]

confirm.

The setting is saved.

is displayed in standby mode.

Note

•

When

ECO

mode is set to

[On]

, the connection

range between the handset and the base station can

be reduced.

ECO+ mode

When the

ECO+

mode is activated, it

eliminates the transmission power of the

handset and base station in standby mode.

Select

[Menu]

Press /

to select , then press

[OK]

to confirm.

Select

[ECO+ mode]

, then press

[OK]

confirm.

Select

[On]

[Off]

, and press

[OK]

confirm.

The setting is saved.

Note

•

Make sure that all the handsets registered to the base

station are M888 in order to have the

ECO+

feature

functioning properly.

•

When

ECO+

is activated, the standby time is reduced.

This is because in

ECO+

mode the base station is not

transmitting any signal in standby mode; therefore the

handset needs to “listen” more frequently for signals

from the base station to detect incoming calls or other

requests from the base station. The time it takes for the

handset to access features like call setup, call log, paging,

and phonebook browsing is also delayed. The handset

will not alert you to link loss in case of power loss or

moving out of range.

The following table shows you the current

status of the handset screen with different

ECO

mode and

ECO+

mode settings.

Summary of Contents for M888




















































Search results

Summary of Contents for M888

Reviews:

Related manuals for M888

Brands by name

Popular brands

Philips M888, Extended User Documentation

Search results

Summary of Contents for M888

Reviews:

Related manuals for M888

Brands by name

Popular brands