English
45
3139 115 23481
Troubleshooting
The DVD player does not start playback.
There is no sound from the centre and
surround speakers.
Radio reception is poor.
The remote control does not function
properly.
Unable to play DivX movies.
The DVD system does not work.
–
Insert a readable disc with the playback side
facing down. The DVD+R/CD-R must be
finalised.
–
Check the disc type, colour system (PAL or
NTSC) and region code.
–
Check for any scratches or smudges on the disc.
–
Press SYSTEM MENU
to turn off the setup
menu screen.
–
You may need to enter the password in order
to change the parental control rating level or
to unlock the disc for playback.
–
Moisture has condensed inside the system.
Remove the disc and leave the system turned
on for about an hour.
–
Make sure the centre and surround speakers
are connected correctly.
–
Press SURR button to select a correct
surround sound setting.
–
Make sure the source you are playing is
recorded or broadcast in surround sound
(DTS, Dolby Digital, etc.).
–
If the signal is too weak, adjust the antenna or
connect an external antenna for better
reception.
–
Increase the distance between the system and
your TV or VCR.
–
Tune in to the correct frequency.
–
Place the antenna farther away from any
equipment that may be causing the noise.
–
Select the source (DISC or TUNER, for
example) before pressing the function button
(
É
,
S
,
T
).
–
Reduce the distance between the remote
control and the system.
–
Replace the batteries with new ones.
–
Point the remote control directly toward the
IR sensor.
–
Check that the batteries are loaded correctly.
–
Check that the DivX file is encoded in ‘Home
Theatre’ mode with DivX 5.x encoder.
–
Disconnect the power cord from the power
outlet for a few minutes. Reconnect the power
cord and try to operate again as usual.
Problem
Solution
NOTE: When sending the product for servicing, both the DVD main system and the AV subwoofer
are required.
001-047-LX85-22-Engfinal
7/8/04, 10:15 AM
45
