42
3139 115 23481
English
Changing wire-less rear
speakers transmission
channel
The wire-less rear speaker system will
automatically turn on once you power up.
If there is a sound distortion, select
another transmission channel.
1
Press and hold
SOUND
on the remote
until ‘
CH X
” appears on the display panel.
➜
"
X
" denotes the frequency channel
1~4.
2
Repeat the above if necessary until you
find a suitable transmission channel.
Helpful Hint:
– The distortion could be the result of
interference caused by other equipment
using same frequency channel in your house
or neighborhood.
Recording to an external
device
1
Connect the external recording device to
LINE OUT (R/L)
. (See page 14
“Connections-optional“).
2
Select the source to record from your
DVD system (DISC, TUNER, TV or
AUX/DI) and start playback (if
necessary).
3
For ultimate recording, press
SOUND
to select ‘CLASSIC’ or ‘CONCERT’ and
press
SURR
to select ‘STEREO’.
4
Start recording on the external recording
device.
Helpful Hint:
– Refer to the owner’s manual of the
connected equipment for details.
Setting the Sleep timer
The sleep timer enables the system to
switch to Eco Power standby mode
automatically at a preset time.
1
Press and hold
DIM
on the remote until
“
SLEEP XX
” appear on the display panel
(
XX
= 15, 30, 45, 60 or OFF).
2
To select the next sleep timer value,
continue pressing
DIM
button while in
sleep timer mode until it reaches the
desired preset turn-off time.
➜
SLEEP
will show on the display panel,
except if "
OFF
" is selected.
➜
Before the system switches to Eco
Power standby mode, a countdown of 10
seconds is displayed.
"
SLEEP10
"
™
"
SLEEP 9
"....
™
"
SLEEP1
"
™
"
SLEEP
"
To cancel the sleep timer
●
Press and hold
DIM
until "
OFF
" appears
or press the
STANDBY ON
(
B
)
button.
Other Functions
001-047-LX85-22-Engfinal
7/8/04, 10:15 AM
42
