User manual
2 Get Started
2.1 Replace the Batteries
Be sure that the power is OFF. Do not replace the batteries
while the power is on, as this may cause the device to
malfunction.
Open the battery cover.
Insert the batteries. Make sure that the batteries
are inserted properly (size “AAA”) and close the
cover. When the batteries are inserted, the LCD
will display all indicators
1
and the device will go
into standby mode (waiting for recording or playback
to be activated
2
).
The power will shut off automatically if no function
is activated for 1 minute.
Press the PLAY/PAUSE/REMAIN button to switch
the power on. Your Voice Tracer will be in standby
mode
2
.
D
Remove the batteries if the Voice Tracer will not be used for an
extended period. Leaking batteries may damage the Voice Tracer.
E
If the Voice Tracer malfunctions, remove the batteries and
re-insert them.
1�
2�
3�
4�
5�
2
1
2.2 Switch the Voice Tracer On
Press the PLAY/PAUSE/REMAIN button to activate
the Voice Tracer. The device will switch to standby
mode. When the batteries are inserted, the LCD
displays all indicators and the Voice Tracer goes into standby
mode
1
.
2.3 Switch the Voice Tracer Off
The power will shut off automatically if functions are not activated
for 1 minute.
2.4 Hold Function
Press and hold the MENU/HOLD button for
approximately 2 seconds when the Voice Tracer is in
playback, recording, or standby mode to activate the
lock function. All buttons are deactivated when the device is in
HOLD mode, and the LCD displays “ON HOLD” when a button
is pressed
1
.
Press and hold the MENU/HOLD button again
for approximately 2 seconds to release the lock
function. The LCD will display “OF HOLD”
indicating that the lock function has been deactivated
2
.
D
HOLD mode will be deactivated if the device switches off and is
turned on again.
1�
1�
2�
1
1
2
E
N
G
L
IS
H
