SpaceWise for Industrial Applications
v. 1.6
Philips Lighting North America
7
4.
Grouping
Grouping is required to initiate system functionality and dimming behaviors.
The Luminaires have to be in a factory new state to group them together. If changes
were previously made on the luminaires then perform a factory reset as per the
instructions in section 12 “
” before proceeding.
a.
Point remote to any luminaire and press
“Open,” once.
Wait for the luminaire to dim
down to 5%.
Make sure the button is pressed only once. Pushing multiple times can
create multiple networks which can cause undesired operation.
b.
Walk to the next luminaire to be added
to the group, point to the luminaire and
press “add.”
Repeat step for adding all the luminaires
in the group.
Added luminaire will dim down
to 5%.
c.
Point to any of the luminaires added in
the group and press “close.”
All the luminaires in the group
will go to 50% light level.
