Philips Hudson2 200P3 Service Manual Download Page 117

Page: 117 / 123

Go to cover page

Forward

Back

General Troubleshooting Guide (Continued)

Magenta or Purple Color means that

the green subpixel is missing.

Cyan Color means that the red

subpixel is missing.

Yellow Color means that the blue

subpixel is missing.

There are 2 easy ways to determine the Missing color problem.

1. View an image that is supposed to be "White".

If one of the colors (RGB) is not functioning.

White can not be produced.

2. View an image that supposed to contain Red, Green and Blue.

Color problems will be apparent when one or more of these

colors can not be displayed.

1. Turn off monitor.

2. Disconnect video

cable.

3. Turn on monitor.

Is picture displayed

normally?

It is need to check and

repair the monitor.

Colors on warning

signal OK ?

YES

Check video cable for

bent pins, reseat it.

END

YES

Signal cable pins

OK ?

YES

1. Try system with

another monitor.

2. Try monitor with

another system.

3. Try changing in

the application.

RED

Green

Blue

White

RED

White

RED

White

Missing Color

White

Green

Blue

Green

Summary of Contents for Hudson2 200P3




























































































































Search results

Summary of Contents for Hudson2 200P3

Reviews:

Related manuals for Hudson2 200P3

Brands by name

Popular brands

Philips Hudson2 200P3, Service Manual

Search results

Summary of Contents for Hudson2 200P3

Reviews:

Related manuals for Hudson2 200P3

Brands by name

Popular brands