Philips HTS8562/12, User Manual

Page: 26 / 52

26
3
Press the following buttons to listen or to
change radio stations:
Button Action
/ or
Alphanumeric
buttons
Select a preset radio station.
Navigation
buttons (left/
right)
Search for a radio station.
Navigation
buttons (up/
down)
Fine tune a radio frequency.
Press to stop the installation of
radio stations.
BACK Press and hold to erase the
preset radio station.
OPTIONS Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
Listen to radio
1
Press
SOURCE
repeatedly until
RADIO
appears on the display panel.
• To listen to a preset station, press
or .
•
To search for a radio station, and then
listen, press Navigation buttons (left/
right).
2
Press +/- ( Volume ) to change the volume.
MP3 player
Connect your MP3 player to play your audio files
or music.
What you need
•
An MP3 player.
•
A 3.5mm stereo audio cable.
Play music
1
Connect the MP3 player to the home
theater as described in the quick start guide.
2
Press SOURCE repeatedly until MUSIC
I-LINK
appears on the display panel.
3
Press Navigation buttons and OK to select
the following settings:
• [Slide Animation]
: Select an animation
for the slideshow.
• [Duration per slide] : Select a display
speed for each picture in a slideshow.
4
Press to stop the slideshow.
Musical slideshows
Create a musical slideshow to play music and
pictures at the same time.
1
Select a music track, and then press
OK
.
2
Press BACK , and go to the picture
folder.
3
Select a picture, and then press ( Play ) to
start the slideshow.
4
Press to stop slideshow.
5
Press again to stop music.
Radio
Listen to FM radio on your home theater, and
store up to 40 radio stations.
What you need
• FM antenna.
Note
• AM and digital radio are not supported.
•
If no stereo signal is detected, you are
prompted to install the radio stations again.
• For the best reception, place the antenna away
from the TV or other sources of radiation.
Tune stations
1
Connect the FM antenna as described in the
quick start guide.
2
Press SOURCE repeatedly until RADIO
appears on the display panel.
» If you have already installed the radio
stations, the last channel that you listened
to is played.
» If you have not installed any radio
stations, the message AUTO INSTALL...
PRESS PLAY appears on the display
panel. Press ( Play ).
EN