47
English
Radio Operations
Before you start .....
Ensure that the antennas are connected
to the main unit. (For some models, the
FM antenna has been connected in the
factory.)
For FM antenna
A
Connect the FM antenna (supplied) to
the
FM
socket.
B
Attach the other end of the FM antenna
to a wall.
For AM/MW loop antenna
A
Stand the AM/MW loop antenna
(supplied) upright to fi x its claw into the
slot.
B
Connect the AM/MW loop antenna to
the
AM/MW
socket.
C
Place the AM/MW loop antenna on a
shelf, or attach it to a stand or wall.
AM/
MW
Helpful Hints:
– For better FM stereo reception, connect an
external FM antenna (not supplied.)
– Position the antenna as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
Tuning to radio stations
A
Press
SOURCE
repeatedly until ‘FM’ or
‘AM/MW’ appears on the display panel
(or press
RADIO
on the remote
control).
B
Press / on the remote control to
start tuning.
The frequency indication starts to
change until a radio station with suffi cient
signal strength is found.
C
Repeat step
B
if necessary until you fi nd
the desired radio station
D
To fi ne-tune the reception of a weak
station, press
/
briefl y and
repeatedly until an optimal reception is
found.
Changing tuning grid
(only applicable for certain regions)
In some countries, the frequency step
between adjacent channels in the
(AM/MW) / FM Band is 9 kHZ / 50 kHz
(10 kHz / 100 kHz in some areas).
Note:
Changing the tuning grid erases all
previously stored preset radio stations.
A
Press
SOURCE
repeatedly until ‘FM’ or
‘AM/MW’ appears.
B
Press
x
.
C
Press and hold
u
until ‘GRID 9’ or
‘GRID 10’ appears.
FM
antenna
AM/MW
loop antenna
