16
The Philips Blu-ray Disc Home Theater is simple to install. However, proper system placement is critical to ensure an
optimum sound experience.
1) Place the front left and right speakers at equal distances from the TV and at an angle of approximately 45
degrees from the listening position.
2) Place the center speaker above the TV or the main unit so that the center channel’s sound is localized.
3) Place the rear speakers at normal listening ear level facing each other.
4) Place the subwoofer at the corner of the room. Otherwise, keep it at least one meter away from the TV.
(Supports up to 1080i
(*1)
, 1080p
(*2)
, 1080p/24 resolution.)
(*1)
1080i : Outputs the video data with frame rate of 30 frames per second.
(*2)
1080p : Outputs the video data with frame rate of 60 frames per second.
Placing the Speakers
• The placement diagram shown here is only a guideline that provides great system performance. You may find other
placement choices that are more suitable for your room layout that provide the sound experience you enjoy.
• To avoid magnetic interference, never position the front speakers too close to your TV.
• The rear speakers are labeled as REAR LEFT or REAR RIGHT.
• The front speakers are labeled as FRONT LEFT or FRONT RIGHT.
• For speaker setup, refer to “Speaker Setup” on page 40.
Connection to the TV
FRONT
RIGHT
FRONT
CENTER
REAR
RIGHT
REAR
LEFT
SUBWOOFER
LEFT
1
Choose the appropriate connection, then proceed to the corresponding
instruction (A, B or C) on the pages 17-18.
HDMI IN
A
Video
Audio
HDMI cable
Your TV
Go To
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.
High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility.
