20
English
Finding the correct viewing
channel
A
Press
STANDBY-ON
to turn on the
unit.
B
Press
DISC
on the remote control.
C
Turn on the TV and switch it to the
correct video-in channel.
You may go to the lowest channel on
your TV, then press the Channel Down
button on your TVs remote control until
you see the Video In channel.
You may press
°
button repeatedly
on your TV’s remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc..
If you are using a RF modulator, set
the TV to channel 3 or 4.
Refer to your TVs user manual on
how to select the correct input on your
TV.
Getting Started
Switching to different play
source
On the main unit
Press the
SOURCE
button on the main
unit repeatedly to select:
DISC
¤
FM
¤
AUX 1
¤
AUX 2
¤
DISC ....
Or
On the remote control
Press
AUX
repeatedly to hear the audio
output from the external device.
‘AUX 1’ for device connected to
AUDIO IN-AUX 1 jacks.
‘AUX 2’ for device connected to
AUDIO IN-AUX 2 jacks.
Press
RADIO
to switch to FM
bandwave.
Press
DISC
to switch to DISC mode.
1_hts3011_37_eng 3_final809.indd20 20
1_hts3011_37_eng 3_final809.indd20 20
2008-02-26 2:12:32 PM
2008-02-26 2:12:32 PM