10
Play audio from TV or other
devices
Press
repeatedly to select the audio output
of the connected device .
Play from radio
The home theater can store up to 40 radio
stations.
1
Check that the FM antenna is connected.
2
Press
.
“
»
AUTO INSTALL...PRESS PLAY
’ appears
on the display panel if you have not
installed any radio stations. Press
.
3
Press the following buttons to control play:
Button
Action
/
Selects a preset radio station.
/
Searches for a radio station.
Fine tunes a radio frequency.
Press and hold to erase the preset
radio station.
Press to stop the installation of
radio stations.
Manual: Press once to access
program mode, and press again to
store the radio station.
Automatic: Press and hold for ve
seconds to reinstall radio stations.
Note
AM and digital radio are not supported.
•
If no stereo signal is detected, or if fewer than
•
ve stations are found, you are prompted to
install the radio stations again.
For the best reception, place the antenna away
•
from the TV or other sources of radiation.
Change tuning grid
In some countries, you can switch the FM tuning
grid between 50 kHz and 100 kHz. Changing
tuning grid erases all preset radio stations.
1
Press
.
2
Press
.
3
Press and hold
until ‘GRID 9’ (50 kHz)
or ‘GRID 10’ (100 kHz) is displayed.
EN
1_HTS2200_93-EN-US.indd Sec1:10
7/19/2010 1:42:28 PM
