Philips HR2332/11, User Manual

Page: 31 / 68

English 31
Troubleshooting
The appliance does not sound after the plug is put in the wall outlet.
The appliance does not start the pasta making process after the plug is put
in the wall outlet.
After pressing the start button , the appliance makes alarm sounds
and does not work.
• The plug is not connected properly, or the outlet is not connected to power source.
Check whether the power plug is plugged correctly and the outlet is working properly.
• You have not chosen a pasta making program or pressed the start button .
Choose a pasta making program and press the start button .
• The chamber lid is not assembled properly.
Make sure you follow the user manual to assemble the chamber lid properly.
The chamber lid is pushed open from the inside.
• There’s too much flour in the mixing chamber.
The maximum amount of flour for each batch is 400g. If you have put more than 400g of flour
in the mixing chamber, reduce the amount and make another batch of pasta.
• The ratio of flour and water provided in the "Flour/water ratio table" was not followed. The
dough is too wet.
Disconnect from the power source, clean the Pasta and noodle maker, and follow the user
manual again to restart the pasta making.
• The chamber lid is not assembled properly.
Make sure you follow the user manual to assemble the chamber lid properly.
This chapter summarizes the most common problems you could encounter with
the appliance. If you are unable to solve the problem with the information below,
visit www.philips.com/support or refer to page 32 for the consumer care
number to call for assistance.