Philips HQ8260, User Manual

Page: 10 / 276

HQ8270/HQ8260
- The remaining battery capacity is indicated by the number of battery
level lights that are on (Fig. 12).
travel lock
You can lock the shaver when you are going to travel. The travel lock
prevents the shaver from being switched on by accident.
Note: The travel lock cannot be activated when the shaver is connected to
the mains.
activating the travel lock
1 Press the on/off button for 4 seconds to enter the travel lock
mode (your display may differ from the one shown in the
figure) (Fig. 14).
,
The lock symbol and the power-on symbol in the on/off button
flash for a few seconds to indicate that the travel lock has been
activated.
Note: When you press the on/off button for less than 4 seconds while the
shaver is in the travel lock mode, the lock symbol and the power-on symbol
in the on/off button flash for a few seconds.
Deactivating the travel lock
1 Press the on/off button for 4 seconds.
,
The lock symbol disappears and the motor starts running to
indicate that the travel lock has been deactivated.
The shaver is now ready for use again.
Note: When you start charging, the travel lock is automatically deactivated.
Charging
It takes approx. 60 minutes to fully charge the battery.
When you charge the shaver for the first time or after a long period of
disuse, let it charge for 4 hours.
Tip: To optimise the battery capacity, fully charge the shaver and then use
it normally until the battery is completely empty. Repeat this process three
EnglisH
12