2
Let the shaver run until it stops, undo the two
screws in the hair chamber and remove it.
3
Undo the two screws at the back of the shaver
and remove the back panel of the housing.
4
Remove the side panels by pulling them off the
sealed power unit.
5
Undo the three screws in the sealed power
unit.
6
Remove the back panel of the sealed power
unit by means of a screwdriver.
7
Remove the battery.
Be careful, the battery strips are very sharp.
Do not connect the shaver to the mains again after
the battery has been removed.
EnglisH
12
Summary of Contents for HQ7310
Page 179: ...181 ...
Page 180: ...4222 002 5021 4 182 ...
