»
Note: The appliance is equipped with an auto-shut off function.
After 60 minutes, the appliance switches off automatically. You can
re-start the appliance by pressing and holding the button until
the LCD screen lights up.
4
Slide the straightening plates lock ( ) to to unlock the plate arms.
5
Comb your hair and take a section that is not wider than 5cm for
straightening.
6
Place it between the straightening plates ( ) and press the plate
arms together.
•
Sonic function is on by default with the SONIC indication
displayed ( ) on the LED screen.
•
The sonic vibration only starts when the straightening plates are
pressed together. The straightening plates make a rattling sound
when they are slightly in contact, which does not affect the
performance of the appliance.
•
To switch off or on the sonic function, press the SONIC button ( ).
7
Slide the straightener down the length of the hair in a single motion
(max. 5 seconds) from root to end, without stopping to prevent
overheating.
•
To create flicks, turn the straightener half-circle inwards (or
outwards) when it reaches the hair ends. Hold the straightener in
that position for 2 to 3 seconds, and then release it.
8
After 20 seconds, repeat step 6 and 7 until you achieve the desired
look.
9
To straighten the rest of your hair, repeat steps 6 to 8.
After use
:
1
Deactivate the key-lock function by sliding and holding the key-lock
button ( ) for 1.5 seconds.
2
Switch off the appliance and unplug it.
3
Place it on a heat-resistant surface until it cools down.
4
Clean the appliance and straightening plates with damp cloth.
Summary of Contents for HP8362
Page 2: ...e f g h i b a c d j k l ...
