Philips HP6502/10, User Manual

Page: 11 / 120

Remove the skin cooler (Fig. 7).
Remove epilating head (Fig. 1).
Press the release button (1) and move the epilating head in the direction
of the arrow (2).
Place the shaving head on the appliance and press it onto the
appliance until it snaps home (‘click’) (Fig. 1).
5 Switch on the appliance by selecting speed II.
6 Place the shaving head onto your skin and move the appliance
slowly and smoothly against the direction of hair growth. Press the
appliance lightly (Fig. 1).
cleaning and maintenance
Never rinse the adapter or the appliance itself with water.
Do not use any corrosive detergents, scouring pads or cloths, petrol,
acetone etc. to clean the appliance.
1 Make sure the appliance is switched off and unplugged.
Remove the skin cooler from the appliance and slide the insulating
sleeve off the skin cooler.
Clean the pivoting cooling head of the leg skin cooler with the
brush supplied or with a moist cloth after each use.
Make sure the outside of the skin cooler is completely dry before
you freeze it again.
cleaning the epilating head
Clean the epilating head after every use.
1 Make sure the appliance is switched off and unplugged.
Remove the epilating head (Fig. 1).
Press the release button (1) and move the epilating head in the direction
of the arrow (2).
Remove the massaging element (Fig. 15).
EnglisH
11