Philips HP6473, Manual

Page: 16 / 96

16
Solution
Remove the protective sleeve
before putting the skin cooler
in the freezer cassette.
Move the epilating head
against the direction of the
arrow to attach it and move it
in the direction of the arrow
to remove it.
Move the shaving head against
the direction of the arrow to
attach it and move it in the
direction of the arrow to
remove it.
Switch the appliance off,
unplug it and remove the
shaving foil.Then clean the hair
chamber and the cutter block
with the cleaning brush
supplied. Remove any hairs
that may have got stuck under
the trimmer.
Replace the shaving foil if it is
damaged or worn.
Move the peeling head against
the direction of the arrow to
attach it and move it in the
direction of the arrow to
remove it.
Do not use the exfoliating
head within two days after
epilation.
Cause
The protective sleeve
is still around the skin
cooler.
You are not moving
the epilating head in
the right direction.
You are not moving
the shaving head in
the right direction.
The shaving head is
dirty.
The shaving foil is
damaged or worn.
You are not moving
the peeling head in
the right direction.
You used the
exfoliating head
shortly after epilation.
Problem
The freezer cassette
cannot be closed
when the skin cooler
is in it.
The epilating head
cannot be attached or
removed.
The shaving head
(HP6479 and HP6475
only) cannot be
attached or removed.
Reduced shaving
performance (HP6479
and HP6475 only).
Stronger skin irritation
than usual after
shaving (HP6479 and
HP6475 only).
The peeling head
cannot be attached or
removed.
Skin irritation occurs
after exfoliation.
ENGLISH