Philips HP6473, Manual

Page: 15 / 96

15
Solution
Place the epilating head on the
appliance and move it against
the direction of the arrow
indicated on the epilating head
until it snaps home.
Some skin irritation may occur
the first few times you use the
appliance.This is absolutely
normal and should quickly
disappear. For tips to reduce
skin irritation, see the first
section of chapter 'Using the
appliance'. Also make sure you
keep the epilating head clean.
Make sure you store the skin
cooler in the freezer or
freezing compartment (***)
for at least 6 hours before you
use it.
Make sure you store the skin
cooler in the freezer or
freezing compartment (***)
for at least 6 hours. Do not
store the skin cooler in the
refrigerator.
Make sure the skin cooler is
always in proper contact with
your skin during epilation.
Pass the skin cooler over your
leg a few times to make it
start pivoting again. Always
make sure the outside of the
skin cooler is completely dry
before you freeze it.
Cause
The epilating head has
not been attached
correctly.
You used the epilator
for the first time or
after a long period of
disuse.
The skin cooler was
not cooled long
enough.
The skin cooler was
not cooled in the
freezer or freezing
compartment.
The skin cooler does
not touch the skin.
The pivoting cooling
head is frozen.
Problem
Skin irritation occurs.
The skin cooler is not
cool enough.
The pivoting cooling
head of the leg skin
cooler doesn't move.
ENGLISH