Philips HomeCooker HR1040, Manual

Page: 21 / 106

EnglisH
21
Problem Possible cause Solution
The appliance
produces some
smoke.
The heating plate and/or pot
are not completely clean.
Make sure you clean the heating plate and the pot
properly after each use.
The appliance may produce
some smoke when you use
it for the first time.
It is normal for a new product to produce an
unpleasant smell or emit some smoke when it
is first used.This is because new electric motors
have a safety lacquering on the motor windings,
which emit this unpleasant smell or even smoke,
when they get warm during the first uses. This
phenomenon stops after you have used the
appliance a few times.
The stirrer blocks. You put too many
ingredients in the pot.
Remove the ingredients and give the stirrer a light
push. Do not overload the pot.
During roasting a piece
of meat got stuck on the
bottom of the pot.
Give the stirrer a slight push.
The message ‘Err’
appears on the
display.
An error has occurred. Have the appliance checked by a service centre
authorised by Philips.
The display shows
°C, but I want to
work with °F.
This is possible. Press the temperature increase and decrease
button at the same time for 3 seconds to switch
from °C to °F and back again.