18
EN
2
On the TV, switch to the input source of
HMP7100
:
• On the remote control of your TV, use the source button to select the
input connector of
HMP7100
.
3
To switch
HMP7100
to standby mode, press again on the remote control.
»
The power indicator lights up red.
Auto standby
From the Home screen, switch on
[Auto standby ]
in
[Setup]
>
[Preference ]
.
If there is no button press or media play on
HMP7100
for 30 minutes,
HMP7100
switches to standby mode automatically.
Screen saver
From the Home screen, go to
[Setup]
>
[Preference ]
to switch on
[Screen
saver]
.
If there is no button press or media play on
HMP7100
for 10 minutes, the screen
saver is activated. To exit the screen saver, press any button on the remote control.
SOURCE
TV
AV
HDMI 1
HDMI 2
HDMI 3
Side HDMI
Side AV
