EN 31
En
glish
5
Set up your TV
Note for professional
installers
These settings are accessible to guests. They
can also be accessed in the professional
mode menu by selecting
[TV setup]
.
Picture and sound
More picture settings
You can change the settings in the Picture
menu.
1. Press .
2. Select
[Setup]
>
[TV settings]
>
[Picture]
, then press
OK
.
3. Select a setting to adjust, then press
OK
.
Note:
Options marked with a * are available
for certain models only.
[Smart picture]
: Access predefined
smart picture settings.
[Reset]
: Reset to default factory
settings.
[Backlight contrast]
: Adjust the
contrast of the TV backlight.
[Brightness]
: Adjust the intensity and
details of the dark areas.
[Colour]
: Adjust the level of colour
saturation.
[Hue]
: Compensate colour variations in
NTSC transmissions.
[Sharpness]
: Adjust sharpness in the
image.
[Noise reduction]
: Filter and reduce
noise in the image.
[Tint]
: Adjust the colour balance in the
image.
[Custom tint]
: Customise tint setting.
[Pixel Plus HD]
/
[Pixel Precise HD]
*:
Control advanced settings to fine-tune
each pixel to match surrounding pixels.
This setting produces a brilliant, high-
definition image.
-
[HD Natural Motion]
*: Reduce
motion judder and reproduce smooth
motion.
-
[Clear LCD]
*: Enable superior
motion sharpness, better black level, high
contrast with a flicker-free, quiet image and a
larger viewing angle.
-
[Super resolution]
: Enable
superior sharpness, especially on lines and
contours in the picture.
-
[Dynamic contrast]
: Set the level
at which the TV automatically enhances
details in the dark, middle and light areas of
the picture.
-
[Dynamic backlight]
: Reduce
power consumption by dimming the TV
backlight to match room lighting conditions.
-
[MPEG artefact reduction]
:
Smooth the digital transitions in the picture.
-
[Colour enhancement]
: Set the
colours to be more vivid and improve the
resolution of details in bright colours.
-
[Gamma]
: Non-linear setting for
picture luminance and contrast.
-
[Video contrast]
: Change the
intensity of the bright areas, keeping dark
areas unchanged.
[PC mode]
: Allow picture settings to
be changed when a PC is connected to
the TV through HDMI.
If enabled, you can select
[Picture
format]
>
[Unscaled]
which provides
maximum detail for display of PC
content.
[Light sensor]
: Adjust settings
dynamically to match lighting conditions.
[Picture format]
: Change the picture
format.
[Screen edges]
: Change the picture
size.
