SensorT
ouch Thermometer
INSTRUCTIONS:
1. Place sensor head flush on center
of forehead, 1 inch above eyes.
2. Depress blue button while gently
sliding thermometer from center
of forehead toward hairline.
3. Release button and remove from
head to read temperature
QUESTIONS? CALL 1-800-243-7884
or visit our website at
www
. SensorT
ouch.com
SensorTouch Thermometer
INSTRUCTIONS:
1. Place sensor head flush on center
of forehead, 1 inch above eyes.
2. Depress blue button while gently
sliding thermometer from center
of forehead toward hairline.
3. Release button and remove from
head to read temperature
QUESTIONS? CALL 1-800-243-7884
or visit our website at
www. SensorTouch.com
AFFIXING PRODUCT LABEL
For “at-a-glance”, quick instructions on how to use
the SensorTouch Thermometer:
1
Remove the special, quick instructions label and apply it
to battery compartment cover on the back of the
thermometer.
INDICATORS
Audible Indicator
1
Each time you hear the gentle audible sound, it indicates
the thermometer has detected a higher temperature.
It stops when it has sensed the highest (peak)
temperature.
LED Indicator
2
Blinking Red LED will also indicate a temperature
measurement is in process.When the LED stops blinking
and stays lit, your peak temperature has been recorded.
There is an LED light on both sides of the thermometer,
for verification that a temperature measurement is in
progress regardless of which way you hold the thermometer.
9.
8.
BATTERY INSTALLATION/REPLACEMENT
Your new SensorTouch Thermometer requires a
9V battery (included).
1
Slide the battery cover downward as shown to open.
2
Insert the new 9V battery as indicated.
Make sure that the (+) and (-) are positioned correctly.
3
Close the battery cover.
VOLT
9
