DU-PH-0050-03 Rev D 3/27/12 GCX Corp. Page 2 of 3
Installing Mounting Assembly in Channel
1. Insert channel slide (rear of Mounting Assembly) in Channel. Slide Mount to
desired position in channel and tighten two (2) set screws (right) with 1/8'' hex
wrench provided.
Mounting the Heartstart MRx
1. Pull Plunger and open the Bed Hook Latch (below left).
2. Hook the bed hook (rear of Heartstart MRx) over the Mounting Bar (below center).
3. Close the Bed Hook Latch over the bed hook, ensuring that the Plunger snaps snaps into clearance hole (below right).
Insert Slide
Set Screws (2)
Plunger/Latch Open
Latch Closed
