34
a
'
Please enter programme number
' appears on the
screen
b
This message appears when the TV channel has not been assigned
yet.
Enter the program number and confirm with
OK
.
a
The following message appears on the screen: '
G-Code
number wrong
'
b
The entered G-Code number is incorrect. Repeat the entry or end
with
TIMER
s
.
b
Check time/date (see chapter 'Installing your DVD recorder', section
'Setting the time & date').
G-Code
Manual
Home
Please enter the G-Code programming number and
press OK to confirm.
1 2 3 4 5 = = = =
Grid
Search
Schedule
Info
/Record
Freq. Timing
21-Oct 20:00
21:30 BBC1
Once 0
P
The decoded data appears after confirmation.
You can use the colour buttons to make the following settings.
First, the right tile must be highlighted (
C
button). Check the
functions (descriptions) in the corresponding colour field
before pressing a button.
Deactivate 'VPS/PDC'!
If 'VPS/PDC' appears instead of the time, press the yellow function
button until the 'V/P' sign disappears.
Setting up repeat recordings
You can choose from the following settings with the green action button:
'
Frequency
'
:
'
Once
'
: single recordings
'
M-F
'
: Repeated daily recordings (Monday to Friday).
'
Mon
'
: Repeated weekly recordings (every week on the
same day e.g. Monday).
6
If all information is correct, press the
OK
button. The data is
stored.
7
To end, press
TIMER
s
.
If one or more recordings have been programmed '
TIMER
' will light up
on the display.
Programming recordings without the
G<Code
®
System
Preparation:
•) Switch on the TV set, and if necessary, select the programme number for the
DVD recorder.
•) Switch on the DVD recorder.
1
Press
TIMER
s
on the remote control.
G-Code
Manual
Home
Schedule displays programmes for Watch or Record.
Press
B
to use. Press the Red button for G-Code
recording. Press the Green button for Manual
recording. Press
D
for Search. Press
C
for Info.
Grid
Search
Schedule
Info
No programmes
2
Press the green button.
P
The current date will be displayed.
3
Enter the date using the number buttons
0..9
4
Confirm with
OK
.
How can I correct wrong entries?
If you have already confirmed the entry with
OK
, you can select one
of the following functions:
Repeat entry: Green colour button
Cancel: Red colour button
5
Enter the start time for the show using the number buttons
0..9
.
Confirm with
OK
.
6
Enter the finish time for the TV show using the number buttons
0..9
Confirm with
OK
.
7
Check the data you entered.
O
If necessary, go back a position to change entered data using
the green function button.
Programming a recording (TIMER)
