12
Philips · HDP16x0 & HDP16x0TV
2
Press the black latch locking.
3
Lift the lever blue retention.
4
Insert the new batteries into the battery compart-
ment with the positive and negative poles as shown.
Make sure the pola and -) are aligned cor-
rectly.
5
Press the locking lever until you hear "CLICK" it
tells you that the closure is correct.
6
Replace the battery cover in place and press down
to close.
Placing the USB receiver RF
Remote Control (RF)
Your remote control is recognized by the device with
the supplied USB receiver connected to a rear USB
port.”.
1
Take the USB receiver and insert it into a USB port
on the device.
2
3
4
5
CLICK
Notice
Normally the batteries will last for around
one year. If the remote control stops working,
please replace the batteries. If the device is
not used for a long time, take out the batter-
ies. This will prevent leakage and possible
damage to the remote control.
The used batteries should be disposed of
according to the recycling regulations of your
country.
Notice
Respect the direction of insertion, do not
force any case!
Screeneo_User-Manual_HDP16x0_V1-1_EN-US_253634032-A.book Page 12 Jeudi, 12. février 2015 11:31 11
