35
ESC
OK
2.5. MAINTENANCE SETTING
PRODUCT COUNTERS
DESCALING CYCLE 59(I
BREW GROUP CLEANING CY
CARAFE WASH CYCLE
CARAFE AUTO CLEAN
1
REFILL WATER TANK
WITH DESCALING SOLUT
OK
3
ESC
OK
2.5.2. MAINTENANCE SETTI
START DESCALING
CYCLE?
2
Select the menu option.
1SFTTUIF0,CVUUPOUPDPOöSN
3FöMMXBUFSUBOLXJUIEFTDBMJOHTPMVUJPO
1SFTTUIF0,CVUUPOUPDPOöSN
8BSOJOH0ODFUIJTTFMFDUJPOJTNBEFUIF
XIPMFDZDMFXJMMIBWFUPCFDPNQMFUFE
1SFTTUIF0,CVUUPOUPDPOöSNPS&4$
UPFYJU
BOILER DESCALING CYCLE MENU
%FTDBMJOHTIPVMECFQFSGPSNFEFWFSZNPOUITPSXIFOUIFNBDIJOFEJTQMBZTUIFSFMFWBOUNFTTBHF5IFNBDIJOFNVTUCFPOUPQFSGPSN
this cycle; it automatically controls the distribution of the descaling solution.
DO NOT LEAVE THE MACHINE UNATTENDED DURING THIS OPERATION.
WARNING! NEVER USE VINEGAR AS A DESCALING SOLUTION.
Only use the Saeco descaling solution, especially designed to respect the technical features of the machine, to ensure its performance
XJMMOPUEFDSFBTFXJUIUJNFBOEGPSBTBGFBOESJTLGSFFVTF5IFEFTDBMJOHTPMVUJPOJTUPCFEJTQPTFEPGBDDPSEJOHUPUIFNBOVGBDUVSFST
instructions and/or regulations in force in the country of use.
/PUF#FGPSFTUBSUJOHBEFTDBMJOHDZDMFNBLFTVSFUIBU
1. THE INTENZA WATER FILTER HAS BEEN REMOVED
"DPOUBJOFSPGBEFRVBUFTJ[FPSBDPVQMFPGDPOUBJOFSTBSFBWBJMBCMFBOEBSFQMBDFEJOUIFQPJOUTJEFOUJöFE
DESCALING AND/OR RINSE CYCLES CANNOT BE STOPPED; ALL THE PHASES MUST BE COMPLETED. IF THE MACHINE IS
SWITCHED OFF OR IN CASE OF POWER FAILURES, THE INTERRUPTED CYCLE MUST BE REPEATED FROM THE BEGINNING.
HOWEVER, CYCLES MAY BE PAUSED BY PRESSING THE "PAUSE" BUTTON; IT WILL BE POSSIBLE TO RESUME THE CYCLE AT
ANY TIME BY PRESSING THE "START" BUTTON.
TURN THE SBS DIAL ALL THE WAY TO THE LEFT, COUNTER-CLOCKWISE (SEE PAGE 11), BEFORE STARTING THE CYCLE.
5PDPSSFDUMZQSFQBSFUIFEFTDBMJOHTPMVUJPOQPVSUIFFOUJSFDPOUFOUPGUIF4BFDPDPODFOUSBUFEEFTDBMJOHTPMVUJPOJOUPUIFXBUFSUBOLBOE
UIFOöMMUIFUBOLXJUIGSFTIXBUFSVQUPUIF."9MFWFM
Note: During the descaling cycle, some alarm messages may appear to allow for a correct management of the machine.
After resetting the message, always press the "START" button to resume the descaling cycle.
