Philips HD7853, User Manual

Page: 10 / 162

,
During the flushing cycle, the water in the water reservoir is flushed
through the machine and the boiler is filled with water. The flushing
cycle takes some time (approx. 90 to 150 seconds).
Never interrupt the flushing cycle halfway. If you do, the boiler does not
fill itself properly.
Note: During the flushing cycle, the machine produces more noise than during
a regular brewing cycle.
,
The machine switches off automatically when the flushing cycle ends.
Now your Philips SENSEO
®
coffee machine is ready for use.
Note: If the machine does not work, repeat steps 1-7. Do not interrupt the
flushing cycle.
Brewing sEnsEo
®
coffee
tips for the best sEnsEo
®
quality
- Use fresh water every time.
- Use the SENSEO
®
coffee pods that have been specially developed by
Douwe Egberts for your SENSEO
®
coffee machine for a full, round
taste.
- Always use milk at refrigerator temperature (5-8°C) to obtain hot
frothed milk of high quality for your cappuccino.
- You can use any type of milk you like. However, different types of milk
result in different amounts of froth and different froth qualities. For the
best result, we advise you to use semi-skimmed or full-fat milk.
- Remove used coffee pods directly after brewing.
- Clean the milk container unit if you are not going to use it again
straightaway (see chapter ‘Cleaning the milk container unit’).
- If you have not used the coffee machine for more than one day, you
have to flush it with fresh water to refresh the water in the boiler
before you use it again (see section ‘Flushing the coffee machine in
chapter ‘Cleaning the machine’).
Filling the water reservoir
1 Fill the water reservoir with cold water to a level above the MIN
indication and place it back onto the machine.
The MIN indication indicates the minimum amount of water required for
brewing coffee. Always fill the water reservoir beyond the MIN level.
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.
EnglisH
10