Philips HD5730, User Manual

Page: 11 / 326

5 Press the button for short coffee, for standard coffee or for long
coffee.
Press the button once for 1 cup or twice within 2 seconds for 2 cups.
You can interrupt the brewing process at any time by pressing the
button for short coffee, for standard coffee or for long coffee, as
previously selected.
If the coffee comes out one drop at a time, not at all or too fast, adjust
the grinding coarseness (see section ‘Adjusting the coffee mill’).
You can also change the standard amount of coffee the appliance
brews, see section ‘Changing the coffee quantity for espresso’.
The appliance grinds the beans and brews coffee.
Note: If you want some extra coffee in your cup, press the previously
selected button again within 3 seconds after the appliance has stopped
brewing. Keep the button pressed until the cup contains the desired amount of
coffee and then release the button.
Once the set amount of coffee has been brewed, the appliance
automatically stops brewing and ejects the coffee grounds into the
waste bin.
After a few seconds, ‘READY TO USE’ appears on the display to
indicate that you can brew the next cup of coffee.
6 If the message ‘EMPTY WASTE BIN!’ appears, remove the waste
bin and empty and clean it.
Note: The message ‘EMPTY WASTE BIN!’ appears after every 14 cups. When
it appears, you cannot brew coffee again until you empty and clean the waste
bin.
1 Open the service door at the front by pulling the latch.
2 Remove the drip tray and empty and clean it.
3 Remove the waste bin, empty it and clean it thoroughly.
-
-
-
,
,
,
EnglisH
11