6.5
Devices
HDMI connections
The HDMI-HDCP procedure might take a few seconds before •
.the picture from a device appears
If the TV does not recognise the device and there is no •
picture, try switching from one device to another and back again
to restart the HDCP procedure. Or switch the device off and
.back on again
If sound interruptions occur persistently, see the user manual of •
the device to check the output settings. If that does not help,
.connect an additional audio cable
If a DVI to HDMI adaptor is used, check that an additional •
.audio connection is in place to complete the DVI connection
EasyLink HDMI-CEC
Check if the connected device supports the HDMI-CEC •
standard and is properly set up. Read the user manual that comes
.with the device
.Check if the HDMI cable is properly connected •
.Check if EasyLink on the TV and device is switched on •
Make sure that the System audio control in your HDMI-CEC •
audio devices is properly set up. Read the user manual that
.comes with your audio device
PC display
The refresh rate of a PC connected to the TV with VGA or •
.DVI to HDMI adapter should set to 60Hz
Check that the correct resolution mode is selected on your •
.PC. See the list in
Help
>
Specifications
>
Display resolutions
76
Troubleshooting / Devices