If you want to change the DVB setting to start a new channel
installation, press
h
>
Setup
>
Channel settings
and press
OK
.
Select
Channel installation
>
Antenna or Cable DVB
and press
.
OK
. Select the DVB setting you want
DVB-C channel installation
For ease of use, all DVB-C settings are set to automatic. If your
DVB-C provider gave you specific DVB-C values, like a symbol
rate or a frequency, enter these values when the TV asks for
.them during installation
DVB-T + DVB-C
You can set up your TV for DVB-T and DVB-C. Install one
system followed by the other. When both installations are
complete, the Channel list will show both DVB-T and DVB-C
.channels
Reception quality
If you receive digital channels, you can check the quality and
.signal strength of a channel
If you use an antenna, you can reposition the antenna to try and
.improve the reception
To check the reception quality of a digital channel, switch to the
channel and press
h
>
Setup
>
Channel settings
and press
OK
. Select
Channel installation
>
Digital : reception test
and
.press
OK
The digital frequency is shown for this channel. If the reception is
poor, you can reposition your antenna. To check the signal
.quality of this frequency again, select
Search
and press
OK
To enter a specific digital frequency yourself, select the frequency,
position the arrows on a number with
x
and
w
and change the
number with
u
and
v
. To check the frequency, select
Search
.and press
OK
If you use DVB-C to receive channels, the options
Symbol rate
mode
and
Symbol rate
are available. For Symbol rate mode,
select
Automatic
, unless your cable provider gave you a specific
symbol rate value. To enter the symbol rate value, use the
.number keys
Manual installation — Analogue
Analogue TV channels can be manually tuned in channel by
.channel
To install analogue channels manually, press
h
>
Setup
>
Channel settings
and press
OK
. Select
Channel installation
>
.
Analogue : manual installation
and press
OK
System 1
To set up the TV system, select
System
and press
OK
. Select
.your country or part of the world where you are now
Find channel 2
To find a channel, select
Find channel
and press
OK
. Select
Search
and press
OK
. You can also enter a frequency yourself. If
the reception is poor, press
Search
again. If you want to store
.the channel, select
Done
and press
OK
Fine tune 3
To fine tune a channel, select
Fine tune
and press
OK
. You can
fine tune the channel with
u
or
v
. If you want to store the
.channel found, select
Done
and press
OK
Store 4
You can store the channel on the current channel number or as
a new channel number. Select
Store current channel
or
Store as
.
new channel
You can redo these steps until you found all available analogue
.TV channels
Clock settings
In some countries, digital broadcasts do not send UTC -
Coordinated Universal Time information. The daylight saving
change might be ignored and the TV might show an incorrect
.time
To correct the TV clock, press
h
>
Setup
>
TV settings
>
Preferences
>
Clock
and select
Country dependent
. Select
.
Daylight saving
and select the appropriate setting
To set the time and date manually, select
Manual
. Then select
.
Time
or
Date
Setup / Channels
45
