28
6
Disconnect GoGear Vibe from the
computer.
GoGear Vibe restarts after the
»
firmware is updated and is ready for
use again.
13 Update GoGear
Vibe
GoGear Vibe is controlled by an internal
program called firmware. Newer versions of
the firmware may have been released after you
have purchased GoGear Vibe.
The software program called
Philips Device
Manager
can use your computer to check for
firmware updates that are available on the
Internet.
Install
Philips Device Manager
on your
computer from GoGear Vibe or download the
latest version from www.philips.com/support.
Note
Your music files are not affected by a firmware
•
update.
Manually verify / update
firmware
1
Ensure that your computer is connected
to the Internet.
2
Connect GoGear Vibe to the computer
(see section
Connect and charge
for
instructions).
3
On your computer, click
Start
>
Programs
>
Philips Digital Audio Player
>
Vibe Device Manager
to launch
Philips
Device Manager
.
4
Click
Update
»
Philips GoGear Vibe Device Manager
checks for updates and installs new
firmware from the Internet, if available.
5
When the display shows
Update
completed
, click
OK
.
EN
